PULSER-HC-Lon – Electric heating controller with LON communication, 1-phase, 230 V and 24 V

  • LonWorks communication
  • Heating and cooling

 

Pulser HC-LON is a zone controller for controlling heating and cooling in sequence based on Lon-technology. The controller has a triac output to control electric heating (10 A) and an extra output (cooling alt. heating), 3-point or to 24 V thermal actuator. Triac control is more accurate than on/off-control and

therefore gives increased heating comfort and lower energy costs.

The controller can be used with either internal or external sensor or with a temperature signal from a LonWorks network. The main setpoint is set via the LonWorks network. With the setpoint knob on the controller, it can

be shifted ± 3°C. Controller has internal sensor, but it can be used also with extarnal sensor.

 

Modes of operation

 

Via the Lon-network the PULSER-HC-LON can be set to different operation modes: present, not present and standby. Shiftable setpoint and also individual setpoints for heating and cooling. To save energy, the controller will be forced to shut down if the window indication is activated.

 

Technical description

Supply 1-phase, 230 V AC and 24 V AC
Output (load) 10 A
Setpoint 0…30°C (sensor determines the range (Regin NTC sensor))
Setpoint adjustment ±3°C
Load (additional output) 24 V AC, 3-point or one on/off, 0.5 A
Mounting Wall
Protection class IP30